Kingston KC3000 M.2 SSD Review: The Fastest Flash You Can Get (Updated) – Tom's Hardware

Tom’s Hardware is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Learn more
By published
Kingston’s 1TB KC3000 isn’t quite as fast as the 2TB model, but it trades blows with the best SSDs on the market, delivering some of the fastest overall performance results we’ve seen.
Kingston’s 1TB KC3000 isn’t quite as fast as the 2TB model, but it trades blows with the best SSDs on the market, delivering some of the fastest overall performance results we’ve seen.
+ Fast PCIe 4.0 performance and cool operation
+ Attractive design
+ 5-year warranty and high-endurance ratings
– Costly
– High power use
– Lacks AES hardware encryption
December 22, 2021 Update: We’ve updated this article with new testing for the 1TB Kingston KC3000 M.2 NVMe SSD on page 2.
Original Review published November 8, 2021:
Designed to compete with the performance leaders on our best SSDs list, Kingston’s KC3000 features the fastest hardware combo we’ve seen from any Phison-based drive yet. Leveraging Phison’s PS5018-E18 PCIe 4.0 x4 NVMe controller and Micron’s 176L TLC NAND flash operating at full steam 1,600 MTps, the KC3000 is a potent SSD for both creative professionals and hardcore gamers. Available in capacities up to 4TB, Kingston’s flagship drive looks sleek and keeps cool thanks to a low-profile graphene aluminum heat spreader, but it will cost you a pretty penny compared to your average NVMe SSD. 

The Kingston KC3000 is available in capacities ranging from 512GB up to 4TB. Although most capacities are on the pricey side, including our 2TB sample, the 1TB model is priced particularly aggressively at the time of writing, listed at $174.99. The other capacities range from $0.20-$0.24 per gigabyte. 
Kingston rates the KC3000’s performance for up to 7 GBps sequential reads and writes with a random read and write of 1 million IOPS. It features a large dynamic write cache that spans one-third of its available capacity, meaning it can outperform the Seagate FireCuda 530 and Corsair MP600 Pro XT in moderate file transfers. 

Kingston backs the KC3000 with a five-year warranty and limits it to some solid endurance figures. Each capacity is rated higher than the Samsung 980 Pro and WD_Black SN850. At 2TB, our sample is rated to handle up to 1.6 petabytes worth of writes within its warranty period. However, while impressive, this somewhat pales in comparison to the Seagate FireCuda 530’s endurance figures.

The KC3000 supports Trim, S.M.A.R.T. data reporting, end-to-end data path protection, and can be securely erased, but it does not support AES 256-bit hardware encryption for speedy, secure password protection. Kingston provides a key for Acronis True Image HD for cloning over your old data and the company’s website has an SSD toolbox for download, Kingston SSD Manager, which allows you to monitor drive health and update the firmware. 
Kingston KC3000
Kingston KC3000
The Kingston KC3000 comes in an M.2 2280 single or double-sided form factor depending on which capacity you get. The 512GB and 1TB come single-sided while the larger capacities come with components on both sides of the PCB. 
The design of the KC3000 is one of the best we’ve seen. We appreciate the well-thought-out and executed use of labels on both sides of the SSD. The top remains blacked out with only the essential info listed while the back-side hides the distracting QR code and compliances. 
Similar to the Team Group T-Force Cardea A440, the KC3000 comes with a graphene label. The difference between the two is that the Kingston’s is mixed with aluminum while the Team Group’s was mixed with copper.

Phison’s high-performance, 8-channel PCIe 4.0 x4 NVMe 1.4 NVMe SSD controller, the PS5018-E18 lies at the heart of the Kingston KC3000. It leverages a triple-CPU primary architecture based on Arm Cortex R5 cores and offloads common, repetitive firmware code to a dual-CPU coprocessor, accelerating writes and queueing. 
The controller is built on a 12nm process to keep a handle on the heat output while operating at 1 GHz. It features ASPM, ASPT, and supports the low-power L1.2 idle state to keep cool. It also thermal throttles if it is to exceed a temperature of 84 degrees Celsius based on its S.M.A.R.T. data.
To attain its high endurance ratings, the KC3000 takes advantage of Phison’s fourth-generation Low-Density Parity-Check (LDPC) ECC and the company factory overprovisioned by 7.4%. This not only aids with sustained write performance but also is implemented to aid with bad block management and other background NAND management routines.
Kingston KC3000
Kingston KC3000
Kingston KC3000
The controller interfaces with a DDR4 DRAM cache provided by a Kingston-branded chip that operates 1,600 MHz. Also, interfacing are thirty-two dies of Micron’s 512Gb 176L TLC flash, operating at full speed, 1,600 MTps. 
With the flash operating so fast, the Kingston KC3000 comes to us as the most responsive retail Phison E18-based NVMe SSD that we have reviewed thus far. At this speed, and paired with its larger SLC cache, the KC3000 should have the upper hand on the Seagate and Corsair as they duke it out in battle.
MORE: How We Test HDDs And SSDs
MORE: All SSD Content
Current page: Features and Specifications
Get instant access to breaking news, in-depth reviews and helpful tips.
Thank you for signing up to Tom’s Hardware. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Tom’s Hardware is part of Future US Inc, an international media group and leading digital publisher. Visit our corporate site.
© Future US, Inc. 11 West 42nd Street, 15th Floor, New York, NY 10036.


Share this post:

Leave a Reply